Ball Bearings
Deep groove, self-aligning, angular contact and thrust types — pick the family by the load direction, then the bore.
7 categories
View Ball BearingsRequest a QuoteThis catalog covers six product lines — ball bearings, roller bearings, specialty and automotive bearings, linear motion, housings and mounted units, and oil seals — plus shaft couplings. Together they contain 25 categories. You do not need to know our part numbering: send the designation from your machine, the dimensions from your drawing, or a photo of the worn part, and we will cross-reference it to the right line page and quote the whole list on one RFQ.
Deep groove, self-aligning, angular contact and thrust types — pick the family by the load direction, then the bore.
7 categories
View Ball BearingsRequest a QuoteTapered, spherical, cylindrical, needle and crossed rollers — line contact for heavier radial loads.
7 categories
View Roller BearingsRequest a QuoteWheel hubs, insulated bearings, screw supports, rod ends and eccentrics for one-off assemblies.
5 categories
View Special & Automotive BearingsRequest a QuoteRails, blocks and linear bearings, sized by the 15 / 20 / 25 / 30 series and the travel your axis needs.
3 categories
View Linear MotionRequest a QuoteSplit housings and ready-to-mount units — the shaft diameter and bolt layout are enough to start.
2 categories
View Housings & UnitsRequest a QuoteTC double-lip seals in NBR, FKM or PTFE, matched to shaft diameter, housing bore, width and medium.
1 categories
View Oil SealsRequest a QuoteJaw, disc, pin and rigid couplings sized to torque, shaft diameters and misalignment.
1 categories
View CouplingsRequest a QuoteNot every inquiry starts with a part number. Use whichever of these three routes you have, and put the result in the RFQ — we will confirm the fit before quoting.
Tell us the equipment and the duty. Agricultural machinery usually needs sealed ball bearings and mounted units; CNC machines need matched rails and blocks at a stated preload; hydraulic pumps and gearboxes need an oil seal matched to shaft diameter, housing bore, width and medium; conveyors and material handling use split housings and self-aligning inserts; electric motors often need insulated bearings to stop shaft currents; automotive wheel ends need a hub unit matched to the flange and ABS ring.
Send the designation printed on the old part, or a photo of the marking. We cross-reference standard industry designations to our own catalog and confirm bore, outside diameter, width and seal or profile before quoting.
No part number? Measure the bore, outside diameter and width for a bearing; shaft diameter, housing bore and width for a seal; rail width, hole pitch and travel length for a linear axis. State the quantity and the operating speed or medium as well.
Common metric sizes in the main ball and roller families are usually available from stock, while non-standard bores, special clearances, ceramic or insulated versions, and OEM marking are built to order through our partner factories. We do not publish prices or stock counts on this site: send the RFQ and the quote states MOQ, lead time and Incoterms up front. If a size is not available, we say so in the first reply rather than leaving you waiting.
Send the part numbers and quantities in one RFQ. We reply with unit price, MOQ, lead time and Incoterms.