Cylindrical Roller Bearings — Choose the Flange Before the Size

The Flange Letter Decides Whether the Shaft Is Located

A cylindrical roller bearing uses rollers with a near-line contact against cylindrical raceways, giving high radial load capacity and low friction at moderate to high speed. The rings are separable, which simplifies mounting where an interference fit is needed on both shaft and housing. The important design variable is which ring carries the flanges: NU and N types have no flange on one ring and therefore allow axial displacement of the shaft relative to the housing (they act as non-locating bearings), while NJ, NUP and NF types have flanges that locate the shaft and can accept a limited axial load. Getting this letter wrong is the most common reason a replacement cylindrical roller bearing fails to locate an axis correctly.

Tell us the bore, outside diameter and width, the flange configuration you need (NU / N / NJ / NUP / NF or the equivalent drawing), and whether the bearing is the locating or the non-locating position in the arrangement. Give the radial load, speed, the required internal clearance and precision grade, the cage material and the lubrication method. If the axis also sees axial load, say how much: a non-locating type must be paired with a separate locating or thrust bearing, and we would rather specify the pair than let you discover the omission after assembly. Include the housing and shaft fit tolerances if they are already on the drawing — cylindrical roller bearings are sensitive to ring distortion from an over-tight fit. We quote the bearing with the same lot number on the dimensional inspection report and the material certificate.

Cylindrical Roller Bearing Models

Cylindrical roller bearing, 25 × 52 × 15 mm, NU type — placeholder illustration

Cylindrical roller bearing, 25 × 52 × 15 mm, NU type

  • Bore (d)25 mm
  • Outside diameter (D)52 mm
  • Width (B)15 mm
  • FlangeNU
[PLACEHOLDER]
Cylindrical roller bearing, 40 × 80 × 18 mm, NJ type — placeholder illustration

Cylindrical roller bearing, 40 × 80 × 18 mm, NJ type

  • Bore (d)40 mm
  • Outside diameter (D)80 mm
  • Width (B)18 mm
  • FlangeNJ
[PLACEHOLDER]
Cylindrical roller bearing, 60 × 110 × 22 mm, NUP type — placeholder illustration

Cylindrical roller bearing, 60 × 110 × 22 mm, NUP type

  • Bore (d)60 mm
  • Outside diameter (D)110 mm
  • Width (B)22 mm
  • FlangeNUP
[PLACEHOLDER]

Request a Quote for Cylindrical Roller Bearings

Send the bore, outside diameter, width and the duty in one RFQ. We confirm the fit before quoting and state MOQ, lead time and Incoterms.